Ghost Hunting Paranormal Equipment Tester Lcd Digital Black Magnetic Field Detector Radiation Dosimeter Portable Led Emf Meter

Ghost Hunting Paranormal Equipment Tester Lcd Digital Black Magnetic Field Detector Radiation Dosimeter Portable Led Emf Meter

Description:

Shell Material: ABS

Detection Range: 0~20+milliGauss

Detection Frequency: 50/60Hz (50~1000 Hz-ELF) (1000~20.000Hz-VLF)

Accuracy: 5%(typical)

Operating Temperature: 0~120° F(-18~49°C)

Battery Requirements: 9 Volt battery (not include)

Features: keep you away from radiation, which is good for your health

Specifications:

The EMF Meter is a compact and easy to use Magnetic Field strength meter. The EMF Meter can be used indoors or outdoors for measuring any electric device or power lines. There are 5 LED’s, each represents a field strength range as follows.

GREEN: “Normal” zone-Normal background Magnetic Field

0 to 1.5 milliGauss

GREEN: “Low”zone-Low-Level Magnetic Field

1.5 to 2.5 milliGauss

YELLOW: “Caution” zone-Mid-level Magnetic Field

2.5to 10 milliGauss

ORANGE: “High” zone-High-Lovel Magnetic Field

10 to 20 milliGauss

RED: “Warnina” zone-Extremely high Magnetic Field

20+milliGauss

OPERATION

1) Hold the EMF METER with your thumb on the switch

2) Point it toward the EMF source, then depress and hold down the switch (a short flash of the LED’s will occur)

3) The LED will indicate the range of the EMF at that level

4) Moving the device from side to side or rotating it may change the reading, the highest reading is most accurate

5) Move closer or further away to the EMF source to determine the “Normal” zone , as indicated by the Green LED

Helpful Hints:

– Record the readings on the enclosed Exposure Log , repeat periodically, since fields can change in strength

– if the GREEN LED(Normal)doesn’t light ,the battery is low

– To change battery remove the two screws ,replace 9V battery

Package Included:

1* EMF Meter

1* Manual